Precious Techno Engineering

Features:

• Top performance
• Fine finish
• Dimensionally accurate

We are leading manufacturers of Vertical Autoclave.

Features:

• Excellent in work
• Durable nature
• Sturdy nature

Used for sterilization on under saturated steam pressure at

any selected point between15 to 22 psi (adjustable),

however this can be used for higher pressure up to 30 psi.

 

0 · Working temperature of 121C.

 

· These double walled units have inner chamber (Boiler)

made of stainless steel SS 304 / SS 316 grade (as per

demand).

 

· Outer wall is covered with stainless steel sheet.

 

· Thick stainless steel lid is _ghtened by radial locking system

and can be lied through a pedal lifting device for user

comfort

 

· Fitted with joint less silicone rubber gasket.

 

· Systems are hydraulically tested up to 40 p.s.i. as a Safety

Measure.

 

· All autoclaves are fitted with standard accessories such as

PID controller, water indicator / water level gauge,

pressure gauge, steam release cock, spring loaded safety

valve, Vacuum Breaker, pedal liftting device and heating

element.

 

· Space between boiler and outer shell works as air

insula_on however we may incorporate mineral glass wool

insulation if customer desires.

 

· Heating is done through specially designed water heaters

of suitable wattage to ensure optimumum sterilization time in

every sterilization cycle.

 

· Supplied complete with S.S. basket, cord and plug.

· Supplied with cord and plug to work on 220/230 volts A.C.

 

Supply.

It is used for dry sterilization pressure of 10 to 20 p.s.i. (adjustable). It has an inner chamber, steam jacket and outer wall made of S.S. duly argon welded. The space between the outer wall and steam jacket is filled with high-grade glass wool to minimize the temperature loss. All sterilizers are hydraulically tested up to 40 p.s.i. The lid is made of thick Stainless Steel/Gun Metal and closed by wing nut/radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety valve, water level indicator, steam release valve, pressure gauge, and S.S. basket. Supplied complete with cord and plug to work on 220/230 volts A.C. supply. Fitted with vacuum breaker as a safety device.

Product Specifications :


Optional Accessories :

• Automatic pressure control switch (Automatic Indfos Piezostat)
• Automatic low water level cut-off device
• Automatic 0-60 minutes "GERMAN" Timer 
• vaccum pump
• HMI display 
• Solenoid valve for automatic exhaust /purging

Inner Chamber is made up of thick non-magnetic steel of 304/316 quality and jacket is made out of rolled steel. The single door made of rolled steel lined with S.S. sheet has a radial locking system. All units are hydraulically tested up to 40 psi. The space between outer cover made of thick rolled steel sheet and a steam jacket is filled with an asbestos sheet or glass wool to minimize thermal losses. The boiler is made of thick S.S. sheet and is located under the sterilizer. It is fitted with water level indicator, safety valve, pressure gauge, and water inlet and drain valves. The unit is fitted with low-water level cut-off device and automatic pressure control device. The door cannot be opened when the chamber is under pressure. Two separate valves are provided for evacuating steam from the inner chamber and jacket, as and when desired. Fitted with a dial thermometer and automatic vacuum breaker. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.